AsiaTec

     English  Azerbaijan  Armenia  Persian

Hard Cover Maker Machine

t20-rex

Case maker T-20 Rex

The T-20 Rex is a flexible and dynamic case maker for the production of cover with round and square back, but also for the fabrication of folder file, games from table, calendars and photo book. It is a strong machine with enough electronic but in the same time the operator can operate and avoid any "stop" on the production

Technical data :

Book sizes                                                            min. 115 mm x 380 mm (w x h)

                                                                             max. 170 mm x 680 mm (w x h)

Board Thickness                                                    min. 1 mm

                                                                              max. 4 mm

Cycle speed approx.                                              3600 cover /hour

Electrical requirements approx.                              15,5 kW

Machine weight approx                                         6700 kg

Floor space                                                           4.170 mm x 3.550 mm (l x w)

Features

Size change by means of electric motors

Special pressing unit with Vacuum System

Touch screen

Flexible spine attachement (min. 8 mm)

Vacuum pump

Board feeding conveyor 

cube

CASEMAKER CUBE

The new On demand Case Maker CUBE is an automatic machine with industrial design for produce Case in low quantity with      maximum flexibility. The machine use industrial Animal glue.

This machine can be operated only with one person.

Technical data :

Cover sizes                                                          min. 115 mm x 160 mm (w x h)

                                                                            max. 400 mm x 650 mm (w x h)

Board Thickness                                                   min. 1 mm

                                                                            max. 4 mm

Cycle speed approx.                                            900 cover /hour

Electrical requirements approx.                            15 Kw

Machine weight approx.                                      4000 kg

Floor space                                                        3.500 mm x 3.600 mm (l x w)

Features

Short make ready

Size change by motors

Touch screen 17 PLC

Siemens Control Unit

Flexible spine attachment

Stacker

toweplus

TOWER PLUS Casing-In Line

The TOWER PLUS is compact and strong. It is equipped with an  automatic cover feeder, automatic book block feeder, and an   universal spine forming station for round and square back books. The gluing system is conventional: two rollers apply the (cold) glue on the end papers when the book is lift in the tower. It possible to equipped it with the industrial roller design adapt for the Hot-Melt application. The book case is  automatic positioned in the hopper feeder and automatically transferred to the register position with the book block. Once the casing-in operation is done, the three blades delivers the book sidewise on a conveyor, where it will be transferred directly to the pressing unit. The machine is build with all details of the industrial machine of famous brand in the market.

Technical data :

Book sizes                                                          min 100 mm x 100 mm (w x h)

                                                                           max 350 mm x 420 mm (w x h)

Thickness                                                            min. 3 mm

                                                                           max. 70 mm

Cycle speed approx.                                           700 books/hour

Electrical requirements approx.                            15 kW

Machine weight approx.                                       4.000 kg

Floor space                                                         4.000 mm x 4.000 mm (l x w)

Features Manual book block feeder Automatic hopper feeder for book cases Automatic case spine forming device Automatic casing-in unit (cold glueAutomatic book delivery Automatic size adjustments Connection to the pressing unit Easy press – pressing and building-in unitMeasuring table for quick data entry <TCS >.

easy tower

EASY TOWER Casing-In Line

The TOWER LINE is easy to use, compact and strong. It is equipped with an automatic cover feeder, a semi-automatic book block feeder (completely automatic solution available upon request), and an universal spine forming station for round and square back books. The gluing system is conventional: two rollers apply the (cold) glue on the end papers when the book is lift in the tower. The book case is positioned in the hopper feeder and automatically transferred to the register position with the book block. Once the casing-in operation is done, the blade delivers the book sidewise on a conveyor, where it will be transferred directly to the pressing unit.

Technical data :

Book sizes                                                           min 100 mm x 100 mm (w x h)

                                                                           max 350 mm x 420 mm (w x h)

Thickness                                                            min. 6 mm

                                                                           max. 70 mm

Cycle speed approx.                                           400 books/hour

Electrical requirements approx.                            15 kW

Machine weight approx.                                      3.200 kg

Floor space                                                        3.000 mm x 4.000 mm (l x w)

Features

Manual book block feeder

Automatic hopper feeder for book cases

Automatic case spine forming device

Automatic casing-in unit (cold glue)

Automatic book delivery

Automatic size adjustments

Connection to the pressing unit

Easy press – pressing and building-in unit

Measuring table for quick data entry (TCS) 

ct100

High Speed Casing-In Line CT100

The CT 100 it is a high-performance machine for the casing-in of thin books, CD trays,

pop-up books and all those products which can hardly be cased-in with a traditional casing-in machine with blades. CT100 can be equipped with a special kit for books with flexible cases (such as integral cases), padded cases, etc. The special feature of this machine is that the glue is applied directly on the case and not on the endsheet of the book block as in the traditional lines.

Technical data :

Book sizes:                                                               min. 100 x 100 mm (w x h)

                                                                                max. 285 x 380 mm (w x h)

Thickness:                                                                min. 1 mm

                                                                                max. 25 mm

Cycle speed:                                                            6.000 books/hour

Power requirements: approx.                                    15 kW

Machine weight: approx.                                           9.500 kg

Floor space:                                                             12.500 mm x 3.225 mm (l x w)

Features

Automatic hopper feeder for book cases with prepile belt

Up-right, alternating and lay-down unit

Book block feeder with short pre-pile belt

Preparation for Hot- Melt gluing unit: 2 nozzles

Automatic Hot- Melt control system new model

Adjustable margin

“adjustable in steps” 3,0 -3,5 -4,0- 4,5- 5,0 mm”

Set of wheels for joint forming, standard type

Table for automatic size change ( TCS)

ct60

 High Speed Casing-In Line CT60

The CT60 is the new high-performance machine for the casing-in of thin books, CD trays, pop-up books and all those products that can hardly be cased-in in a traditional casing-in machine with blades.

CT60 produces square back books with a thickness from 1 to 25 mm at a maximum speed of 60 cycles per minute.

Technical data :

Book sizes:                                            min. 100 mm x 100 mm (w x h)

                                                             max. 285 mm x 380 mm (w x h)

Thickness:                                             min. 1 mm

                                                             max. 25 mm

Cycle speed:                                         3.600 books/hour

Power requirements:                             approx. 15 kg

Machine weight:                                   approx. 8.500 kg

Floor space:                                         8.000 mm x 3.225 mm (l x w)

Features:

Automatic hopper feeder for book cases

Book block feeder with short pre-pile belt

Preparation for hot melt gluing unit: 2 nozzles

Automatic hot melt control system new model

Adjustable margin

“adjustable in steps” 3,0 -3,5 -4,0- 4,5- 5,0 mm”

Set of wheels for joint forming, standard type 

Adjustable margin

“adjustable in steps” 3,0 -3,5 -4,0- 4,5- 5,0 mm”

Set of wheels for joint forming, standard type

Table for automatic size change ( TCS)

mt casing-in module

MT CASING-IN MODULE

The MT manual casing in machine is easy to use, compact and strong. It is equipped with manual  book block feeder, and fix cover position. The gluing system is conventional: two rollers apply the (cold) glue on the end papers when the book is lift in the tower. Once the casing-in operation is done, the book will be transferred directly to the pressing unit.

BUILDING IN MACHINE EASY PRESS

PRESS ONE is a building in unit that integrate pressing unit and nipping station; all these  two operation are make together in the same  place. The machine is an authentic station of a traditional pressing machine of casing in line, that use Hydraulic oil for power pressing.

 

Thickness:                                             min. 1 mm

                                                             max. 25 mm

Cycle speed:                                         3.600 books/hour

Power requirements:                              approx. 15 kg

Machine weight:                                    approx. 8.500 kg

Floor space:                                          8.000 mm x 3.225 mm (l x w)

Features :

Automatic hopper feeder for book cases

Book block feeder with short pre-pile belt

Preparation for hot melt gluing unit: 2 nozzles

Automatic hot melt control system new model

Adjustable margin

“adjustable in steps” 3,0 -3,5 -4,0- 4,5- 5,0 mm”

Set of wheels for joint forming, standard type 

Adjustable margin

“adjustable in steps” 3,0 -3,5 -4,0- 4,5- 5,0 mm”

Set of wheels for joint forming, standard type

Table for automatic size change ( TCS)

 easy band

HEAD and TAIL BANDING MACHINE

The EASY BAND is a flexible and compact unit for the application of head and tail band on round and square book blocks. This extremely easy to use machine is the perfect solution for medium and small book binding companies.

The head/tail band is joined to the glue strip before being applied to the book spine. Due to its working concept the machine does not require cleaning at the end of the production.

 
vafat_hazrate_fateme

Details Visitor

Unknown Unknown
Unknown Unknown
Unknown Bot Unknown Bot
IP Address: 54.144.14.134

Details Stats


Todey0
Yesterday0
Current Month41
Previous Month206
Current Year401
Previous Years8549
Total Visit29764
Robots Today106

In Social Networks to Join us

 Twitter     

cloob  telegram  instagram  google  whatsapp

Audience Site

We have 3 guests online

Quick Contact

Please complete the the information accurately
*
*
*
*
Valid XHTML 1.0 Transitional W3C CSS Validation